Developments



The system of forced ventilation of a building, combined with its heating

58.png
The system of forced ventilation of a building, combined with its heating allow to reduce the load on the heating system, to save energy for the ventilation of buildings, providing comfortable accommodation at less material resources and energy costs, and to direct the saved thermal energy of the boiler to hot water, heating of greenhouses or swimming pools, winter garden, etc.
Просмотров сегодня: 0 | Просмотров всего: 0 | Категории: Building. Architecture | Economics | Energetics | Аспирант |


Regenerative cartridge of breathing apparatus

57.png
Regenerative cartridges are included in the design of self-contained breathing apparatus which is widely used in the military detachments multifrequency network, chemical, construction, iron and steel industry, in all areas where emergency situations for self-rescue can happen.
Просмотров сегодня: 0 | Просмотров всего: 0 | Категории: Building. Architecture | Chemistry | Minerals industry | Аспирант |


Effective hollow-core reinforced concrete flat slabs for residential and public buildings

38.png
A distinctive feature of the design solution is a system of void formers, in which both the for mers’s hape sand the irrational assembly into blocks using special clamps result into a significant reduction of the structure’s dead weight (up to 30 %).
Просмотров сегодня: 0 | Просмотров всего: 0 | Категории: Building. Architecture | Магистрант |


Effective technology and device of preparation of the artificial soil bases

37.png
In practice, by preparation of the artificial bases under buildings and constructions of industrial and civil function on building sites with adverse and difficult engineering-geological conditions are widely used by methods of shock consolidation.
Просмотров сегодня: 0 | Просмотров всего: 0 | Категории: Building. Architecture | Аспирант |


UNPURLINIG ASSEMBLY OF BRGTU STRUCTURAL COVERAGES

30.1.png
Design and construction of structural besprogonnyh based coating system nodes BrGTU.
Просмотров сегодня: 0 | Просмотров всего: 0 | Категории: Building. Architecture | Студент |


Promising techniques and use of multi-flower crops in planting Minsk

4.png
Processes are used in planting perennial ornamental plants of native and introduced flora including the timing and continuity of bloom, creating a stable decorative effect, color range, using elements of national symbols.
Просмотров сегодня: 0 | Просмотров всего: 0 | Категории: Building. Architecture | Студент |


1. The structure of standard assembly joints and their welded connec-tions for fast erected constructions of different issues from the composite bearing elements (CBE).

49.jpg
3. Maintenance of equal durability, bearing ability and teamwork of the welded shell armature and filler is distinctive features of the offered structures of standard assembly joints. At the expense of design features of welded shell armatures in the area of an assembly joint, additional reinforcing elements and protective overlays. CBE – is structure that consists from spatially stretched welded shell armature, stability of which thin-walled elements is raised at the expense of hardening fillers and ridge sheet reinforcing elements.
Просмотров сегодня: 0 | Просмотров всего: 0 | Категории: Building. Architecture | Mechanical engineering | Metallurgy |


Silk decorative plaster on the basis of secondary raw materials of the textile industry

48.jpg
Silk decorative plaster represents a dry composition of filling compounds and knitting where in quality of filling compound by-products of the textile industry and cellulose for the purpose of decrease in expenses for manufacture of a dry building mix are used, resource-saving, recyclings household and industrial wastes for ecology improvement.
Просмотров сегодня: 0 | Просмотров всего: 0 | Категории: Building. Architecture | Студент |


To develop technology of the combined plates with use of short fibrous production wastes of artificial fur

4.1.jpg
The technology of reception of organo-synthetic fibrous plates with use of a short fibrous waste of the textile industry is developed. The optimum structure of a composite mix providing the best physicomechanical properties of a composite building material is developed. New materials possess high physicomechanical properties and are recommended for wide introduction in manufacture.
Просмотров сегодня: 0 | Просмотров всего: 0 | Категории: Building. Architecture | Light industry | Студент |


Bridge for openings in the walls of stone buildings

Bridge for openings in the walls of stone buildings is designed as a profile of corner section, the short shelves of which are inside the opening. The profile of corner section is made of steel and consists of two unequal parts, installed symmetrically on the opposite sides of the wall, where there is a tightening component that runs through the long shelves. It is as thick as the wall and as wide as the opening and has the form of two threaded connections. Under the short shelves there is a connecting element, that is tightly fixed to them. It can be in the form of plates, rebar or meshes.
Просмотров сегодня: 0 | Просмотров всего: 0 | Категории: Building. Architecture | Студент |
Syndicate content